1 union hall based in Sanford, FL run registered, earn-while-you-learn apprenticeships across HVAC and sheet metal. First-period apprentices are paid a share of the local's journeyman scale — around $11.25 an hour on the sheets we hold — rising each period to full scale on turning out. The percentage steps below are the standard ones used across these trades, not a schedule the local has published; confirm the current figures and intake dates with the hall.
SMART Local 15 run HVAC and sheet metal apprenticeships in Sanford, FL — typically a four- to five-year program of about 8,000 paid on-the-job hours plus roughly 200 classroom hours a year, turning out a journeyman sheet metal worker or HVAC service technician. Against SMART Local 15's published $25.00 journeyman scale (effective 10/21/22), a first-period apprentice earns about $11.25 an hour, roughly $22,500 a year, before the fringe package.
| Period | Share of scale | Hourly | Annualised |
|---|---|---|---|
| 1st period (year 1) | 45% of scale | $11.25 / hr | $22,500 |
| 2nd period (year 2) | 55% of scale | $13.75 / hr | $27,500 |
| 3rd period (year 3) | 65% of scale | $16.25 / hr | $32,500 |
| 4th period (year 4) | 75% of scale | $18.75 / hr | $37,500 |
| 5th period (year 5) | 85% of scale | $21.25 / hr | $42,500 |
| Journeyman (turned out) | 100% of scale | $25.00 / hr | $50,000 |
Step percentages are the standard ones used across the trade, applied to each local's published journeyman sheet — not a schedule the local has published. Sheet set last cross-checked 2026-09-01.
First-period union apprentices in Sanford, FL earn about 45% of their local's journeyman scale — $11.25 an hour on the sheets we hold — and step up each period until they reach full scale on turning out. Health, pension and training contributions are paid on top from day one on signatory work.
Apply through the sheet metal hall that covers Sanford, FL — SMART Local 15. Applications go to the joint apprenticeship and training committee, which opens intake on its own schedule; you take an aptitude test and a panel interview, then sit on a ranked list until indenture. Against SMART Local 15's $25.00 journeyman scale, a first-year HVAC apprentice earns roughly $11.25 an hour.
Registered construction apprenticeships in FL generally ask for: 18 years or older at the time of indenture; High school diploma or GED, with algebra normally required; Proof of legal authority to work in the United States; Valid driver's licence and reliable transportation to jobsites; Aptitude test and panel interview, then ranking on the apprentice list; Ability to pass a physical and a substance screen before dispatch. The local committee sets its own additions, so check with the hall before you apply.
Most of these programs run four to five years, combining paid on-the-job training with classroom instruction each year. You work and earn from the first period; there is no tuition on a registered program, though books and tools are usually on you.
No. Indenture into the apprenticeship is how most people enter the trade — you apply directly to the joint apprenticeship and training committee for the local, not through an employer. If you already have verified hours in the trade, ask the hall about direct entry or an organizing route instead.
We recruit journeyman-level and leadership mechanical, HVAC and electrical talent for contractors, so apprenticeship intake runs through the hall, not through us. Once you have turned out, set a job alert for Sanford, FL and we will send the union-scale openings as they come in.
Union pay in Sanford, FL · Apprenticeship pay by local · Apprenticeships by city · Apprenticeships in Tampa, FL · Apprenticeships in Daytona Beach, FL · Apprenticeships in FT. Lauderdale, FL · Apprenticeships in Gainesville, FL · Apprenticeships in Jacksonville, FL · Apprenticeships in Miami, FL